You are reading the 2026 curriculum (exams up to November 2026). Sitting in February 2027 or later? Go to the 2027 Quantitative Methods guide.
Shortfall risk and Roy's safety-first ratio
Shortfall risk is the chance a portfolio's return falls below a threshold you cannot go under. Roy's safety-first ratio, [E(Rₚ) − R_L] ÷ σₚ, counts how many standard deviations the expected return sits above that threshold. With normal returns, the portfolio with the highest ratio has the lowest shortfall probability.
Before this: Portfolio expected return, variance and the role of correlation
On the exam
- Define shortfall risk, calculate the safety-first ratio, and identify an optimal portfolio using Roy’s safety-first criterion
Define shortfall risk, calculate the safety-first ratio and identify the optimal portfolio under Roy's criterion. Expect three portfolios to rank, a threshold built from a money need, and a shortfall probability read as N(−ratio). The risk-free rate is the distractor.
How deeply to learn each part
- Know the idea
- Understand it in general. It frames other topics, but you will not calculate with it.
- Use it
- Understand it well enough to solve a question with it. Recognize when it applies.
- Memorize
- Learn it by heart. The exam will not give it to you.
You know this one. The full lesson is folded away. The takeaways, formulas and checkpoint below are your quick refresher, and the checkpoint is a fair test of whether you still do.
You tested strong here. The full lesson is folded away. The takeaways, formulas and checkpoint below are your quick refresher, and the checkpoint is a fair test of whether you still know it.
What is shortfall risk?
Shortfall risk is the risk that a portfolio’s value or return falls below some minimum acceptable level over a given time horizon. A pension fund whose assets might drop below its liabilities faces shortfall risk. So does a charity that must pay out a fixed sum each year.
Standard deviation does not capture this well. It treats a surprise above the mean exactly like a surprise below it. An investor with a hard floor cares only about the left side, so the question becomes: which portfolio is least likely to finish under the floor?
How do you set the threshold return?
The floor is the threshold return , written R_L. When the floor comes from a money need, divide the money you must earn by the portfolio’s value today.
How does Roy’s criterion choose a portfolio?
Roy’s safety-first criterion says to choose the portfolio that minimizes the probability that its return falls below R_L. If returns are normally distributed, that portfolio is the one with the highest safety-first ratio : the distance from the expected return down to the threshold, measured in standard deviations.
The charity is choosing among three portfolios. Under a normal distribution, the probability of finishing below 4.2% is N(−SFRatio).
| Portfolio | E(R) | σ | SFRatio | P(R below 4.2%) |
|---|---|---|---|---|
| Cautious | 5.5% | 7% | 0.186 | 42.6% |
| Balanced | 8.5% | 12% | 0.358 | 36.0% |
| Growth | 11.0% | 20% | 0.340 | 36.7% |
A portfolio has an expected return of 8.50% and a standard deviation of 12.00%. The minimum acceptable return is 4.20%. The safety-first ratio is closest to:
(8.5 − 4.2) ÷ 12 = 0.3583
Safety-first ratio0.3583
- 8.5−4.2=÷12=percent units cancel
- 8.5ENTER4.2−12÷percent units cancel
ENTER enter (on the HP, puts the number on the stack)
Try this 0 of 3
- Keep the three portfolios as they are and raise R_L until Growth becomes the best choice.
- Now lower R_L until Cautious becomes the best choice.
- Put the threshold exactly on Balanced's expected return and read its shortfall chance.
Threshold 4.2%. Balanced: safety-first ratio 0.358, chance of falling below 36.0%; Growth: safety-first ratio 0.340, chance of falling below 36.7%; Cautious: safety-first ratio 0.186, chance of falling below 42.6%. Balanced leaves the least area below the threshold.
Drag the Threshold return R_L, tap the chart, or focus the handle and use the arrow keys.
- Cautious
- Balanced
- Growth
| Portfolio | SFRatio | P(R < R_L) |
|---|---|---|
| 1. Balanced | 0.358 | 36.0% |
| 2. Growth | 0.340 | 36.7% |
| 3. Cautious | 0.186 | 42.6% |
Highest ratio first. With normal returns, the highest ratio is the lowest shortfall probability.
Show working
Threshold: R_L = 63,000 ÷ 1,500,000 = 4.2%, the return that pays the grant without touching capital.
Cautious: SFRatio = (5.5% − 4.2%) ÷ 7.0% = 1.3 ÷ 7.0 = 0.186; shortfall probability = N(−0.186) = 42.6%.
Balanced: SFRatio = (8.5% − 4.2%) ÷ 12.0% = 4.3 ÷ 12.0 = 0.358; shortfall probability = N(−0.358) = 36.0%.
Growth: SFRatio = (11.0% − 4.2%) ÷ 20.0% = 6.8 ÷ 20.0 = 0.340; shortfall probability = N(−0.340) = 36.7%.
Choose Balanced: the highest ratio, so its expected return sits the most standard deviations above R_L and the least area falls below it.
Neither calculator has N(z): find N(−SFRatio) in the z-table. Below, the keystrokes give each ratio.
These probabilities assume normal returns. Fat left tails would make each shortfall chance larger than N(−SFRatio) says.
- 5.5−4.2=÷7=0.1857
- 5.5ENTER4.2−7÷0.1857
ENTER enter (on the HP, puts the number on the stack)
Display: 0.1857
- 8.5−4.2=÷12=0.3583
- 8.5ENTER4.2−12÷0.3583
ENTER enter (on the HP, puts the number on the stack)
Display: 0.3583
- 11−4.2=÷20=0.34
- 11ENTER4.2−20÷0.34
ENTER enter (on the HP, puts the number on the stack)
Display: 0.34
- 1. Set the threshold R_L Use it payout ÷ portfolio value, or the minimum return you can accept
- 2. Compute each SFRatio Memorize (E − R_L) ÷ σ, one per portfolio
- 3. Choose the highest ratio Memorize with normal returns it has the lowest shortfall probability
- 4. Shortfall probability Memorize N(−SFRatio), read from the z-table
Exam tip Percent units cancel in the ratio, so type 8.5 and 12 as they are. Only the final probability needs a table.
How do you find the shortfall probability?
A ratio of 0.358 means the threshold lies 0.358 standard deviations below the expected return. For a normal distribution, the probability of landing below a point z standard deviations under the mean is N(−z).
The exam supplies a table of N(z) for positive z, and N(−z) = 1 − N(z).
| z | 0.34 | 0.35 | 0.36 | 0.37 | 0.38 |
|---|---|---|---|---|---|
| N(z) | 0.6331 | 0.6368 | 0.6406 | 0.6443 | 0.6480 |
Because N(−z) falls as z rises, the portfolio with the highest ratio always has the smallest left tail. That is why ranking by ratio and ranking by shortfall probability give the same order, as the table shows: 0.358 beats 0.340 beats 0.186.
How is it different from the Sharpe ratio?
The formula is the same, but the thing you subtract differs.
| Safety-first ratio | Sharpe ratio | |
|---|---|---|
| Subtracts | the investor’s threshold R_L | the risk-free rate |
| Answers | which portfolio is least likely to miss the floor | how much return per unit of risk above a risk-free investment |
| Same number when | R_L is set equal to the risk-free rate | (always) |
The choice can differ. With a risk-free rate of 1%, the Sharpe ratios of the charity’s portfolios are 0.643 (Cautious), 0.625 (Balanced) and 0.500 (Growth), so Sharpe prefers Cautious. Roy’s criterion, using the charity’s 4.2% floor, prefers Balanced. When a question gives a threshold, the threshold goes in the ratio.
What are the other measures of downside risk?
- Standard deviation Memorize spread both above and below the mean
- Shortfall risk Memorize chance of finishing below a threshold return R_L
- Safety-first ratio standard deviations between the mean and R_L
-
- Value at risk Know the idea money loss exceeded only with a small stated probability
- Stress testing Know the idea loss under a specified extreme event
Two other measures express bad outcomes in money and are developed in risk management. Value at risk states a loss that will be exceeded only with a small stated probability over a stated period, for example a 5% one-day value at risk of EUR 2 million. Stress testing asks what the portfolio would lose under a specified extreme event, such as a sharp rate rise or a market crash. Both complement standard deviation instead of replacing it.
Go deeper Why the result depends on normality
The link between the ratio and the probability, N(−SFRatio), holds only if returns are normally distributed. Real returns often have fat tails and negative skewness, which puts more probability in the left tail than a normal curve implies. The ranking by ratio is then less reliable, and the true shortfall probability is higher than the table value. This is why the lesson on skewness and kurtosis matters for risk measurement.
Go deeper Turning a need into a threshold
A fixed payout gives a simple threshold, as in the charity example. In practice the need may grow with inflation or follow a spending rule. If the charity’s payout is expected to rise 2% to EUR 64,260, its threshold rises to 64,260 ÷ 1,500,000 = 4.284%. Portfolio construction uses thresholds like this when it turns objectives into constraints.
Memorize this
MemorizeRoy's safety-first in three lines
| Step | Rule |
|---|---|
| Threshold | = payout ÷ portfolio value |
| Ratio | |
| Choice | highest ratio = lowest |
| Probability |
Memory hook The ratio counts how many standard deviations of cushion sit between the expected return and the threshold. More cushion, smaller left tail.
Know it cold Replace with the risk-free rate and the ratio becomes the Sharpe ratio. When the question gives a threshold, use it, not the risk-free rate.
- 1. Set the threshold R_L Use it payout ÷ portfolio value, or the minimum return you can accept
- 2. Compute each SFRatio Memorize (E − R_L) ÷ σ, one per portfolio
- 3. Choose the highest ratio Memorize with normal returns it has the lowest shortfall probability
- 4. Shortfall probability Memorize N(−SFRatio), read from the z-table
- Standard deviation Memorize spread both above and below the mean
- Shortfall risk Memorize chance of finishing below a threshold return R_L
- Safety-first ratio standard deviations between the mean and R_L
-
- Value at risk Know the idea money loss exceeded only with a small stated probability
- Stress testing Know the idea loss under a specified extreme event
Quick example
A 4,000,000 portfolio must fund a 160,000 payout without touching capital. 160,000 ÷ 4,000,000 = 4.0%.
- 160000÷4000000= 0.04
- 160000ENTER4000000÷ 0.04
ENTER enter (on the HP, puts the number on the stack)
Quick example
Expected return 9%, threshold 3%, standard deviation 15%. (9 − 3) ÷ 15 = 0.40.
- 9−3=÷15= 0.4
- 9ENTER3−15÷ 0.4
ENTER enter (on the HP, puts the number on the stack)
Quick example
Ratio 0.40. N(−0.40) = 1 − N(0.40) = 1 − 0.6554 = 34.5% chance of finishing below the threshold.
- 9−3=÷15= 0.4
- +|- -0.4, then read N(-0.40) in the z-table: 0.3446
+|- change sign
- 9ENTER3−15÷ 0.4
- CHS -0.4, then read N(-0.40) in the z-table: 0.3446
ENTER enter (on the HP, puts the number on the stack) · CHS change sign
How it is asked
-
Pick the portfolio
Threshold 2.5%. A: 6%, σ 8%. B: 9%, σ 12%. C: 12%, σ 20%. Under Roy?
Ratios 0.438, 0.542, 0.475, so B. Traps: C (highest return), A (lowest risk).
-
Build the threshold from a payout
A fund of 750,000 must pay 36,000 without touching capital. R_L?
36,000 ÷ 750,000 = 4.8%.
-
Shortfall probability
Normal returns, safety-first ratio 0.45. P(return below R_L)?
N(−0.45) = 32.6%. Trap: 67.4% (N(+0.45)).
-
Threshold and risk-free rate both given
Minimum acceptable return 4%, risk-free rate 1%. Which goes in the ratio?
The 4% threshold. Using 1% gives the Sharpe ratio, the usual wrong option.
Exam traps
- Picking the highest expected return, or the lowest standard deviation, instead of the highest ratio.
- Using the risk-free rate when the question gives a threshold. That is the Sharpe ratio, not the safety-first ratio.
- Reading N(+SFRatio) instead of N(−SFRatio) for the shortfall probability.
- Halving the probability as if only half of a two-tailed area counted. The shortfall is a single left tail.
- Building the threshold with the wrong base. R_L is the payout divided by the portfolio value today, not by the value after the payout.
- Trusting N(−SFRatio) for fat-tailed returns. It assumes the returns are normal.
Checkpoint
5 exam-style questions. About 90 seconds each.
1A client needs a minimum return of 4%. The risk-free rate is 1%. Portfolio X has an expected return of 7% and a standard deviation of 10%. Portfolio Y: 10% and 16%. Portfolio Z: 13% and 25%. Under Roy's safety-first criterion the client should most appropriately choose:
2Assume returns are normally distributed. For Portfolio Y in the previous question (safety-first ratio 0.375), the probability that its return is less than 4% is closest to:
3Shortfall risk is best described as the risk that:
4A foundation holds USD 4,000,000 and wants to pay out USD 170,000 in one year without reducing its capital. The threshold return, R_L, is closest to:
5The safety-first ratio is identical to the Sharpe ratio when the threshold return R_L equals:
Key takeaways
- Shortfall risk is the risk that portfolio value or return falls below a minimum acceptable level over some horizon.
- SFRatio = [E(Rₚ) − R_L] ÷ σₚ. Choose the highest.
- With normal returns, P(Rₚ < R_L) = N(−SFRatio), and the highest ratio gives the lowest probability.
- With R_L equal to the risk-free rate, the safety-first ratio is the Sharpe ratio.
Quick example
A 4,000,000 portfolio must fund a 160,000 payout without touching capital. 160,000 ÷ 4,000,000 = 4.0%.
- 160000÷4000000= 0.04
- 160000ENTER4000000÷ 0.04
ENTER enter (on the HP, puts the number on the stack)
Quick example
Expected return 9%, threshold 3%, standard deviation 15%. (9 − 3) ÷ 15 = 0.40.
- 9−3=÷15= 0.4
- 9ENTER3−15÷ 0.4
ENTER enter (on the HP, puts the number on the stack)
Quick example
Ratio 0.40. N(−0.40) = 1 − N(0.40) = 1 − 0.6554 = 34.5% chance of finishing below the threshold.
- 9−3=÷15= 0.4
- +|- -0.4, then read N(-0.40) in the z-table: 0.3446
+|- change sign
- 9ENTER3−15÷ 0.4
- CHS -0.4, then read N(-0.40) in the z-table: 0.3446
ENTER enter (on the HP, puts the number on the stack) · CHS change sign
Questions about this lesson?
Where this comes back
- Portfolio Risk and Return: Part II (CAPM and Performance Measures) Portfolio Construction
- Introduction to Risk Management Portfolio Construction
Questions candidates ask
What is Roy's safety-first criterion?
It says the best portfolio is the one with the lowest probability of returning less than a minimum acceptable level, R_L. When returns are normal, that is the portfolio with the highest safety-first ratio, [E(Rₚ) − R_L] ÷ σₚ.
How is the safety-first ratio different from the Sharpe ratio?
They share one formula. The Sharpe ratio subtracts the risk-free rate from the portfolio's expected return. The safety-first ratio subtracts the investor's own threshold return. When the threshold equals the risk-free rate, the two are the same number.
How do you calculate shortfall probability?
Compute the safety-first ratio, then take the standard normal cumulative probability of its negative: P(Rₚ < R_L) = N(−SFRatio). For a ratio of 0.36 read N(−0.36) = 0.359 from a z-table. This assumes normally distributed returns.
Spotted an error? Tell us and we will fix it.