Employment, capital spending, inventories, housing and trade over the cycle
Firms change hours before headcount, so employment lags the cycle. Capital spending is one of the most volatile parts of gross domestic product (GDP): light equipment and software move first, big structures last. The inventory–sales ratio climbs as a slowdown begins and falls in early recovery. Housing leads; trade follows foreign demand and exchange rates.
Before this: The business cycle and its four phases
On the exam
- Describe how resource use, consumer and business activity, housing sector activity, and external trade sector activity vary over the business cycle and describe their measurement using economic indicators
Describe how resource use, consumer and business activity, housing and external trade vary over the business cycle. Expect phase-by-phase patterns for hiring, capital spending and the inventory–sales ratio, plus one small ratio calculation.
How deeply to learn each part
- Know the idea
- Understand it in general. It frames other topics, but you will not calculate with it.
- Use it
- Understand it well enough to solve a question with it. Recognize when it applies.
- Memorize
- Learn it by heart. The exam will not give it to you.
You know this one. The full lesson is folded away. The takeaways, formulas and checkpoint below are your quick refresher, and the checkpoint is a fair test of whether you still do.
You tested strong here. The full lesson is folded away. The takeaways, formulas and checkpoint below are your quick refresher, and the checkpoint is a fair test of whether you still know it.
How do firms adjust their workforce?
Firms change hours before headcount, so employment lags output.
- Employment Memorize lags: overtime and hours first, headcount last
- Capital spending Memorize highly cyclical: light equipment moves first both ways
- Inventories Memorize swing fast; the ratio rises as sales slow, falls in early recovery
- Housing Use it rate and credit sensitive; permits turn early (leads)
- External trade Know the idea exports follow foreign growth and the exchange rate; imports follow domestic demand
Going into a contraction, firms cut overtime and hours, freeze hiring and only then lay people off. They hold on to staff longer than demand alone would justify (labor hoarding ) because finding and training new workers is costly. In prolonged downturns the cuts deepen: consultants, advertising and workers beyond the strict minimum go.
Coming out of a contraction the sequence reverses. Firms add overtime and temporary staff first and hire permanently only once the upturn looks durable. The result is that the unemployment rate turns after output does.
Try this 0 of 3
- Open Recovery and check what happens to inventories
- In the gauge, let sales slip while production holds, and push the ratio above 1.80
- Name the phase for every clue
Pick a phase to see what firms do with workers, equipment and stock, and what happens to housing and trade. The chart shows where the phase sits on the cycle.
- Output gap
- Inventory–sales ratio
Quarter
The output gap is negative in recovery and contraction and positive in expansion and slowdown. Slowdown covers quarters 11 to 15.5 in this example. The inventory–sales ratio falls in recovery, holds in expansion, rises in slowdown and falls back in contraction. Unemployment peaks two quarters after output bottoms.
The ratio climbs from 1.40 to 1.62 in the slowdown: sales cool while factories keep producing. It falls in recovery because sales come back before production does.
Stylized economy, not real data.
3/4Slowdown
Output is still above potential but growth is slowing. Sales cool before firms cut production, so stock piles up.
- Employment (steady)Hiring continues at a slower pace; unemployment falls more slowly
- Capital spending (rising)Firms near capacity still order; orders that add capacity are a late-cycle sign
- Inventories (rising)Sales slow before production is cut: the ratio rises, a warning sign
- Housing (falling)Higher rates and tighter credit: permits and starts fall early
- Trade (steady)Import growth eases as domestic spending slows
How does capital spending move?
Use it
Capital spending (spending on property, plant and equipment) follows profits, cash flow, expectations and capacity utilization , the share of productive capacity in use. Because all of these swing with activity, investment is among the most procyclical and volatile parts of GDP.
| Phase | Capital spending pattern |
|---|---|
| Recovery | Low but rising. Spare capacity, so the focus is on efficiency. Software, systems and light equipment (fast obsolescence) are reordered first. |
| Expansion | Utilization rises, so spending shifts to capacity: heavy equipment, warehouses, plants. Orders run ahead of shipments. |
| Slowdown | Firms near capacity still place orders. Capacity-adding orders are a late-cycle sign. |
| Contraction | Orders halted or canceled. Light equipment with short lead times is cut first, heavy projects later. Maintenance is deferred. |
Exam tip Short lead time means first out and first in. Light equipment leads, heavy projects follow.
Go deeper Reading orders correctly: lumpy orders and 'core' series
Orders include deliveries spread over years. A single contract for a fleet of jets or a batch of naval vessels, delivered over several years, lands in one month and makes the series jump. Analysts therefore watch “core” capital goods orders, which exclude defense and aircraft, to see the underlying trend. Orders also precede shipments, so orders are a widely watched signal of future capital spending.
Go deeper Lean production at the end of a contraction
By the end of a contraction firms run lean: the fewest workers needed for the output they produce. That is why output can start rising before much hiring happens, one more reason employment lags.
How do inventories behave?
Inventories are small relative to GDP, but firms build and run them down quickly, so they can move measured growth a lot. The key gauge is the inventory–sales ratio .
- Recovery: falls Memorize sales recover faster than production
- Expansion: stable Memorize production races to restock
- Slowdown: rises Memorize sales slow before production is cut; a warning sign
- Contraction: falls back to normal Memorize production set below sales to clear stock
| Phase | Sales vs production | Inventory–sales ratio |
|---|---|---|
| Recovery | Sales recover faster than production | Falls |
| Expansion | Production races to restock | Stable |
| Slowdown | Sales slow before production is cut | Rises (warning sign) |
| Contraction | Production set below sales to clear stock | Falls back toward normal |
A distributor holds USD 75 million of inventory and monthly sales are USD 40 million. Its inventory–sales ratio is closest to:
75.00 ÷ 40.00 = 1.875
Inventory–sales ratio, R1.875
- 75÷40=1.875
- 75ENTER40÷1.875
ENTER enter (on the HP, puts the number on the stack)
What about consumers, housing and trade?
Know the idea
- Consumer spending. It follows income and confidence. Durable goods such as cars and appliances swing the most; services and staples the least.
- Housing activity . Very sensitive to interest rates and credit availability. Building permits and starts turn early, so housing tends to lead the cycle.
- External trade . Exports depend on foreign growth and the exchange rate. Imports rise with domestic demand, so a domestic boom often widens a trade deficit.
Go deeper Why inventory build-ups matter beyond the cycle
A growing pile of unsold goods is a warning for analysts of single companies too: it can force price cuts, write-downs and lower margins. The financial statement lessons on inventories show how the accounting method changes what that pile does to reported profit.
Memorize this
MemorizeCapital spending by phase
| Phase | Pattern |
|---|---|
| Recovery | Low but rising; efficiency over capacity; software and light equipment reordered first |
| Expansion | Utilization rises; heavy equipment, warehouses, plants; orders run ahead of shipments |
| Slowdown | Firms near capacity still order; capacity-adding orders are a late-cycle sign |
| Contraction | Orders halted or canceled; light equipment cut first, heavy projects later; maintenance deferred |
Memory hook Short lead time means first in and first out: software and light equipment lead; factories and heavy kit follow.
Know it cold Capital spending is one of the most procyclical and volatile parts of GDP.
MemorizeInventory–sales ratio by phase
| Phase | Sales vs production | Ratio |
|---|---|---|
| Recovery | Sales recover faster | Falls |
| Expansion | Production restocks | Stable |
| Slowdown | Sales slow before output is cut | Rises |
| Contraction | Output below sales | Falls to normal |
Memory hook The ratio is a pile that grows when sales stumble and shrinks when sales run ahead of production.
Know it cold Ratio = inventory ÷ sales. A rising ratio signals a weakening economy near the top.
MemorizeHiring and housing
Know it cold Contraction: cut hours and overtime, freeze hiring, then lay off. Recovery: overtime and temps first, hire once durable. Housing: permits and starts turn early.
- Employment Memorize lags: overtime and hours first, headcount last
- Capital spending Memorize highly cyclical: light equipment moves first both ways
- Inventories Memorize swing fast; the ratio rises as sales slow, falls in early recovery
- Housing Use it rate and credit sensitive; permits turn early (leads)
- External trade Know the idea exports follow foreign growth and the exchange rate; imports follow domestic demand
- Recovery: falls Memorize sales recover faster than production
- Expansion: stable Memorize production races to restock
- Slowdown: rises Memorize sales slow before production is cut; a warning sign
- Contraction: falls back to normal Memorize production set below sales to clear stock
Quick example
A retailer holds USD 49 million of stock and monthly sales fall from USD 35 million to USD 28 million. The ratio moves from 1.40 to 49 ÷ 28 = 1.75.
- 49÷28= 1.75
- 49ENTER28÷ 1.75
ENTER enter (on the HP, puts the number on the stack)
How it is asked
-
Sales slow, output unchanged
A retailer’s sales growth slows while suppliers keep delivering at the earlier pace. Inventory–sales ratio?
Rises (late-expansion pattern). Early recovery is the reverse: the ratio falls.
-
Which order goes first?
Facing falling orders, a manufacturer cancels one: a new factory wing, laptops and software licenses, or half-installed heavy presses.
Laptops and software: short lead times are easiest to cancel.
-
Compute the ratio
Inventory GBP 66 million; monthly sales fall from GBP 55 million to GBP 40 million. New ratio?
66 ÷ 40 = 1.65. Inverting gives the 0.61 trap; keeping old sales gives 1.20.
-
Why does a measure lag?
Why does unemployment lag output in a recovery?
Firms use overtime and temporary staff first and hire only once the upturn looks durable.
Exam traps
- Expecting inventories to rise early in a recovery. They fall, because sales outrun production.
- Saying heavy construction is cut before light equipment. Light equipment goes first.
- Treating employment as a leading measure of the cycle. It lags.
- Inverting the inventory–sales ratio. It is inventory divided by sales.
Checkpoint
4 exam-style questions. About 90 seconds each.
1A retailer's sales growth begins to slow while its suppliers keep delivering at the earlier pace. Its inventory–sales ratio will most likely:
2A manufacturer facing falling orders must trim its capital plans. Which order will it most likely cancel first?
3A wholesaler holds EUR 90 million of inventory. Monthly sales fall from EUR 60 million to EUR 45 million with no change in inventory. The inventory–sales ratio moves from 1.5 to closest to:
4Early in a recovery, firms are most likely to meet rising demand by:
Key takeaways
- Employment lags: hours and overtime move first, headcount last.
- Capital spending is highly cyclical, and light equipment moves first in both directions.
- A rising inventory–sales ratio means sales are slowing near a peak.
- Housing leads the cycle; trade depends on foreign demand and currencies.
Quick example
A retailer holds USD 49 million of stock and monthly sales fall from USD 35 million to USD 28 million. The ratio moves from 1.40 to 49 ÷ 28 = 1.75.
- 49÷28= 1.75
- 49ENTER28÷ 1.75
ENTER enter (on the HP, puts the number on the stack)
All Economics formulas, every lesson
Practice exam-style questions on Understanding Business Cycles
Questions about this lesson?
Where this comes back
- Leading, coincident and lagging economic indicators Understanding Business Cycles
- Analysis of Inventories Financial Statement Analysis
Questions candidates ask
Why does unemployment lag the business cycle?
Hiring and training are costly, so firms cut hours and overtime before they lay anyone off, and in a recovery they add overtime and temporary staff before they hire. Headcount therefore turns after output, and the unemployment rate turns later still.
What does a rising inventory to sales ratio mean?
Inventory is growing faster than sales. It typically happens as a slowdown begins, when sales slow before production is cut. A rising ratio signals a weakening economy; a falling ratio in early recovery means sales are outrunning production.
How does capital spending change over the business cycle?
It is one of the most volatile parts of GDP. It restarts in recovery with software and light equipment, moves to heavy equipment and plants in expansion, and in a contraction orders are halted, light equipment is cut first and heavy projects follow.
Spotted an error? Tell us and we will fix it.