Analyst Dojo
Lesson 6 of 6 6–9% of the exam

Concentration ratio and Herfindahl-Hirschman index

The N-firm concentration ratio adds the market shares of the largest N firms. The Herfindahl-Hirschman index (HHI) adds their squared shares, so it reacts far more to mergers among big firms. Both ignore how easily a newcomer could enter, so neither measures pricing power directly.

4 min cram, 20 min full read. Based on the 2027 CFA® Program Level I curriculum, Economics, Learning Module 1. Also part of the 2026 curriculum, so it applies to the November 2026 exam too.

Tailor this to you: take the self-assessment

Before this: Perfect competition, monopolistic competition, oligopoly and monopoly compared

On the exam

  • Identify the type of market structure within which a firm operates and describe the use and limitations of concentration measures

Identify the market structure and describe the use and limitations of concentration measures. Expect a quick concentration ratio or HHI calculation from market shares, a 'how many equal firms' reading of the HHI, and a limitations question.

How deeply to learn each part
Know the idea
Understand it in general. It frames other topics, but you will not calculate with it.
Use it
Understand it well enough to solve a question with it. Recognize when it applies.
Memorize
Learn it by heart. The exam will not give it to you.

You know this one. The full lesson is folded away. The takeaways, formulas and checkpoint below are your quick refresher, and the checkpoint is a fair test of whether you still do.

You tested strong here. The full lesson is folded away. The takeaways, formulas and checkpoint below are your quick refresher, and the checkpoint is a fair test of whether you still know it.

Cram mode: the one-screen version of this lesson. Switch to Full for the explanations, worked examples and interactives.

What is the ideal measure of market power, and why is it rarely used?

In theory you would estimate the elasticity of demand . If demand is very elastic, the market is close to perfect competition. If demand is inelastic, firms may have market power.

In practice this is hard. Observed prices and quantities are the equilibrium of demand and supply together (the endogeneity problem), so demand and supply must be estimated as a pair. Time-series data may span years in which the market structure changed. Cross-section data are costly to collect, and results depend on the model chosen. So analysts and regulators use simpler measures.

Measuring market power
Market power
  • Ideal measure: elasticity of demand Know the idea very elastic = near perfect competition; inelastic = market power
    • Endogeneity observed price and quantity are equilibrium points of demand and supply together
    • Time-series estimates market structure may have changed
    • Cross-section estimates costly data; results depend on model choices
  • Practical: N-firm concentration ratio Memorize sum of the top N shares
  • Practical: Herfindahl-Hirschman index Memorize sum of squared shares

How do you calculate the concentration ratio and the HHI?

The concentration ratio for the N largest firms adds their market shares. It runs from 0 (perfect competition) to 100% (monopoly).

N-firm concentration ratio Memorize
CRN=s1+s2+⋯+sNCR_N = s_1 + s_2 + \cdots + s_N

The Herfindahl-Hirschman index (HHI) squares the shares first, with shares written as decimals, so that a monopoly scores 1.

Herfindahl-Hirschman index Memorize
HHIN=s12+s22+⋯+sN2(shares as decimals)HHI_N = s_1^2 + s_2^2 + \cdots + s_N^2 \quad (\text{shares as decimals})

If M firms share the market equally, the HHI is 1/M. That gives a handy reading: 1/HHI is roughly the number of equal-sized firms the market behaves like.

Equivalent number of equal-sized firms Memorize
HHI=1M  ⇒  M=1HHIHHI = \frac{1}{M} \;\Rightarrow\; M = \frac{1}{HHI}
Rearrange itHHI and the equivalent number of equal firms: solve for either
The question asks for
An industry has an HHI of 0.125. It is most similar to a market shared equally by closest to how many firms?

1 ÷ 0.125 = 8

Equivalent number of equal-sized firms8

On your calculator
  1. 0.1251/x=

1/x reciprocal

  1. 0.1251/x

1/x reciprocal

InteractiveConcentration before and after a merger

Try this 0 of 3

  • Merge two of the top four firms and compare the % changes
  • Merge two firms that leave CR4 unchanged
  • Make the all-firm HHI exactly 0.25 with shares that add to 100%

Shares add up to 100%.

Merge two firms

CR370.0%
CR482.0%
HHI (top 4)0.1852
HHI (all firms)0.1968
Like this many equal firms5.08

The top four firms hold 82% of the market. The all-firm HHI of 0.1968 means it behaves like about 5.1 equal-sized firms.

Show working

Rank the shares and turn them into decimals: 0.3, 0.22, 0.18, 0.12, 0.08, 0.06, 0.04.

CR4 = 0.3 + 0.22 + 0.18 + 0.12 = 0.82 (82.0%). CR3 = 70.0%.

Square each share: 0.3² = 0.0900, 0.22² = 0.0484, 0.18² = 0.0324, 0.12² = 0.0144, 0.08² = 0.0064, 0.06² = 0.0036, 0.04² = 0.0016.

HHI (top 4) = 0.0900 + 0.0484 + 0.0324 + 0.0144 = 0.1852.

HHI (all firms) = 0.1852 + 0.0064 + 0.0036 + 0.0016 = 0.1968.

Equivalent number of equal-sized firms = 1 ÷ 0.1968 = 5.08.

HHI on your calculator
  1. 0.3x²+0.22x²+0.18x²+0.12x²=0.1852, HHI of the top 4
  2. 0.3x²+0.22x²+0.18x²+0.12x²+0.08x²+0.06x²+0.04x²=0.1968, all firms
  3. 1/x5.08 equal-sized firms

x² square · 1/x reciprocal

  1. 0.3ENTER×0.22ENTER×+0.18ENTER×+0.12ENTER×+0.1852, HHI of the top 4
  2. 0.3ENTER×0.22ENTER×+0.18ENTER×+0.12ENTER×+0.08ENTER×+0.06ENTER×+0.04ENTER×+0.1968, all firms
  3. 1/x5.08 equal-sized firms

ENTER enter (on the HP, puts the number on the stack) · 1/x reciprocal

Squaring makes the HHI notice when big firms combine.

Exam tip Check the question: top N or all firms? Percent or decimal? Squared or not?

What happens to each measure in a merger?

Suppose firms 3 and 4 (18% and 12%) merge into one with 30%. The new top four are 30, 30, 22 and 8.

Squaring gives big shares extra weight, so mergers among large firms move the HHI more. Here the four-firm ratio rises by about 10% (82 to 90) while the four-firm HHI rises by about 27% (0.1852 to 0.2348). The gap grows when the merging firms are the leaders, and the concentration ratio can then barely change at all. That is why regulators favor the HHI when assessing mergers.

Rise in the all-firm HHI from a merger Use it
ΔHHI=2 s1 s2\Delta HHI = 2\,s_1\,s_2

When two firms with shares s1s_1 and s2s_2 combine, the squared term (s1+s2)2(s_1 + s_2)^2 replaces s12+s22s_1^2 + s_2^2, so the all-firm HHI rises by 2s1s22s_1s_2. Check it: 2 × 0.18 × 0.12 = 0.0432, which is exactly 0.24 − 0.1968. The shortcut applies to the all-firm HHI. A top-N HHI can change by a different amount, because the list of leading firms changes.

Rearrange itRise in the HHI when two firms merge: solve for any input
The question asks for
Two firms with market shares of 18.00% and 12.00% merge. The increase in the all-firm HHI is closest to:

2 × 0.18 × 0.12 = 0.0432

Rise in the all-firm HHI0.0432

On your calculator
  1. 2×0.18×0.12=
  1. 2ENTER0.18×0.12×

ENTER enter (on the HP, puts the number on the stack)

What do concentration measures miss?

What concentration measures miss
Limitations
  • Barriers to entry Memorize the threat of entry can discipline a sole incumbent
  • Elasticity of demand Memorize neither measure estimates it directly
  • Concentration ratio ignores mergers among leaders Memorize it barely moves when two large firms combine
  • Market definition geography and substitutes change every number
  • Neither measure captures barriers to entry. A sole incumbent facing easy entry may still price competitively, because a potential entrant is enough to discipline it. Picture the only bike-rental shop in a seaside town, where a rival could start trading from a van within weeks: the shop keeps its prices modest to give the rival no reason to come.
  • Neither measures the elasticity of demand directly.
  • The concentration ratio barely moves when two large firms merge, while the HHI reacts more.
  • Market definition changes every number: geography, and what counts as a substitute.

So a high concentration measure is a prompt for further analysis, not proof of pricing power. An analyst should still ask how easy entry would be and how sensitive buyers are to price.

Regulators care about these numbers because market power can lead to higher prices and lower output, which is inefficient for the market as a whole. Many countries have competition law to preserve competition. An analyst who hears of a proposed merger should always consider whether regulators may block it.

Go deeper HHI on a 0 to 10,000 scale

Regulators usually quote the HHI with shares in whole percents squared, so a monopoly scores 10,000 and the payments market above scores about 1,968. The CFA curriculum uses decimals, with a monopoly at 1. The two scales differ by a factor of 10,000, so check which one a question uses before comparing with any threshold.

Go deeper Why 1 ÷ HHI is only approximate

If all M firms have equal shares, the HHI is exactly 1/M. With unequal shares, 1 ÷ HHI gives the number of equal-sized firms that would produce the same HHI. Unless the shares are equal, it is smaller than the actual number of firms, because small firms contribute almost nothing once squared. The payments market has seven firms but behaves like about five.

Memorize this

MemorizeThe two measures

MeasureCalculationRangeReads as
Concentration ratioSum of top N shares0 to 100%Share held by the top N
HHISum of squared shares (decimals)1/M to 11/HHI = equal-sized firms

Memory hook Squaring gives big shares extra weight, so the HHI notices when big firms combine. A monopoly is 1 and M equal firms give 1/M.

Know it cold HHI uses shares as decimals (0.35, not 35). Compute only for the N firms the question asks for.

MemorizeLimitations of both

Memory hook They count firms, not the freedom to enter.

Know it cold Neither captures barriers to entry or the elasticity of demand. The concentration ratio barely moves when two large firms merge; the HHI rises more.

Measuring market power
Market power
  • Ideal measure: elasticity of demand Know the idea very elastic = near perfect competition; inelastic = market power
    • Endogeneity observed price and quantity are equilibrium points of demand and supply together
    • Time-series estimates market structure may have changed
    • Cross-section estimates costly data; results depend on model choices
  • Practical: N-firm concentration ratio Memorize sum of the top N shares
  • Practical: Herfindahl-Hirschman index Memorize sum of squared shares
What concentration measures miss
Limitations
  • Barriers to entry Memorize the threat of entry can discipline a sole incumbent
  • Elasticity of demand Memorize neither measure estimates it directly
  • Concentration ratio ignores mergers among leaders Memorize it barely moves when two large firms combine
  • Market definition geography and substitutes change every number
N-firm concentration ratio Memorize
CRN=s1+s2+⋯+sNCR_N = s_1 + s_2 + \cdots + s_N
Quick example

Shares of the top four firms are 30%, 22%, 18% and 12%. 30 + 22 + 18 + 12 = 82%.

On your calculator
  1. 30+22+18+12= 82
  1. 30ENTER22+18+12+ 82

ENTER enter (on the HP, puts the number on the stack)

Herfindahl-Hirschman index Memorize
HHIN=s12+s22+⋯+sN2(shares as decimals)HHI_N = s_1^2 + s_2^2 + \cdots + s_N^2 \quad (\text{shares as decimals})
Quick example

Top four shares 38%, 27%, 21%, 14%. 0.1444 + 0.0729 + 0.0441 + 0.0196 = 0.281.

On your calculator
  1. 0.38x²+0.27x²+0.21x²+0.14x²= 0.281

x² square

  1. 0.38ENTER×0.27ENTER×+0.21ENTER×+0.14ENTER×+ 0.281, ENTER then × squares

ENTER enter (on the HP, puts the number on the stack)

Equivalent number of equal-sized firms Memorize
HHI=1M  ⇒  M=1HHIHHI = \dfrac{1}{M} \;\Rightarrow\; M = \dfrac{1}{HHI}
Quick example

An HHI of 0.125 is like 8 equal-sized firms (1 ÷ 0.125).

On your calculator
  1. 0.1251/x 8

1/x reciprocal

  1. 0.1251/x 8

1/x reciprocal

Rise in the all-firm HHI from a merger Use it
ΔHHI=2 s1 s2\Delta HHI = 2\,s_1\,s_2
Quick example

Two firms with 25% and 10% shares merge. 2 × 0.25 × 0.10 = 0.05.

On your calculator
  1. 2×0.25×0.1= 0.05
  1. 2ENTER0.25×0.1× 0.05

ENTER enter (on the HP, puts the number on the stack)

How it is asked

  1. HHI of the top N firms

    Shares 33%, 27%, 19%, 11%, 10%. Three-firm HHI?

    0.1089 + 0.0729 + 0.0361 = 0.2179. The five-firm HHI (0.24) and the three-firm ratio (0.79) are the traps.

  2. Equivalent number of firms

    HHI of 0.25 is most similar to equal sharing by how many firms?

    1 ÷ 0.25 = 4. Reading 0.25 as 25 firms is the trap.

  3. Which measure reacts to a merger?

    The two largest firms merge. Which measure rises more noticeably?

    The HHI, because squaring weights big shares. The concentration ratio barely changes.

  4. Limitations

    Which weakness do the concentration ratio and HHI share?

    Both ignore barriers to entry and do not measure demand elasticity.

Exam traps

  • Forgetting to square in the HHI. Adding the shares just reproduces the concentration ratio.
  • Computing the all-firm HHI when the question asks for the top three (or top four).
  • Typing percentages instead of decimals: 35² = 1,225, not 0.1225.
  • Concluding that high concentration means high pricing power without asking about entry.

Checkpoint

3 exam-style questions. About 90 seconds each.

  1. 1Five firms have market shares of 40%, 25%, 15%, 10% and 10%. The three-firm HHI is closest to:

  2. 2Compared with the concentration ratio, the HHI is more likely to:

  3. 3An industry has an HHI of 0.20. Its competitive structure is most similar to a market shared equally by:

Key takeaways

  • CR_N is the sum of the top N shares; the HHI is the sum of squared shares.
  • 1 ÷ HHI is roughly the number of equal-sized firms.
  • The HHI responds more than the concentration ratio to mergers among big firms.
  • Both ignore barriers to entry and demand elasticity, so they only hint at pricing power.
N-firm concentration ratio Memorize
CRN=s1+s2+⋯+sNCR_N = s_1 + s_2 + \cdots + s_N
Quick example

Shares of the top four firms are 30%, 22%, 18% and 12%. 30 + 22 + 18 + 12 = 82%.

On your calculator
  1. 30+22+18+12= 82
  1. 30ENTER22+18+12+ 82

ENTER enter (on the HP, puts the number on the stack)

Herfindahl-Hirschman index Memorize
HHIN=s12+s22+⋯+sN2(shares as decimals)HHI_N = s_1^2 + s_2^2 + \cdots + s_N^2 \quad (\text{shares as decimals})
Quick example

Top four shares 38%, 27%, 21%, 14%. 0.1444 + 0.0729 + 0.0441 + 0.0196 = 0.281.

On your calculator
  1. 0.38x²+0.27x²+0.21x²+0.14x²= 0.281

x² square

  1. 0.38ENTER×0.27ENTER×+0.21ENTER×+0.14ENTER×+ 0.281, ENTER then × squares

ENTER enter (on the HP, puts the number on the stack)

Equivalent number of equal-sized firms Memorize
HHI=1M  ⇒  M=1HHIHHI = \dfrac{1}{M} \;\Rightarrow\; M = \dfrac{1}{HHI}
Quick example

An HHI of 0.125 is like 8 equal-sized firms (1 ÷ 0.125).

On your calculator
  1. 0.1251/x 8

1/x reciprocal

  1. 0.1251/x 8

1/x reciprocal

Rise in the all-firm HHI from a merger Use it
ΔHHI=2 s1 s2\Delta HHI = 2\,s_1\,s_2
Quick example

Two firms with 25% and 10% shares merge. 2 × 0.25 × 0.10 = 0.05.

On your calculator
  1. 2×0.25×0.1= 0.05
  1. 2ENTER0.25×0.1× 0.05

ENTER enter (on the HP, puts the number on the stack)

All Economics formulas, every lesson

Practice exam-style questions on The Firm and Market Structures

Questions about this lesson?

Where this comes back

Questions candidates ask

How do you calculate the Herfindahl-Hirschman index?

Convert each firm's market share to a decimal, square it, and add the squares for the firms you are asked about. Shares of 38%, 27%, 21% and 14% give 0.1444 + 0.0729 + 0.0441 + 0.0196 = 0.281. A monopoly scores 1.

What is the difference between the concentration ratio and the HHI?

The concentration ratio adds the shares of the largest N firms. The HHI adds their squared shares, so large firms count for more. The HHI therefore reacts more to a merger between big firms, while the concentration ratio barely changes.

What are the limitations of concentration measures?

They ignore barriers to entry, so a sole incumbent facing easy entry may still price competitively. They do not measure the elasticity of demand directly. And they depend on how the market is defined, by geography and by substitutes.

Why do analysts care about competition law when a merger is announced?

Regulators can block or restrict a merger that would create excessive market power. A deal that looks attractive on cost savings may be refused or changed, so an analyst should consider the chance of it going ahead before valuing it.

Spotted an error? Tell us and we will fix it.

  1. Breakeven and shutdown points
  2. Economies and diseconomies of scale
  3. Perfect competition, monopolistic competition, oligopoly and monopoly compared
  4. Monopolistic competition: price, output and the long run
  5. Oligopoly pricing: kinked demand, Cournot, Nash and Stackelberg
  6. Concentration ratio and Herfindahl-Hirschman index

Ask Sensei Listen instead

Questions on Concentration ratio and Herfindahl-Hirschman index

Learn with Sensei, out loud The voice tutor, in early access

Sensei teaches the lesson aloud and stops when you interrupt: "wait, why is the geometric mean lower?" It answers with the lesson's own example, then quizzes you by voice. Every account can try Sensei on one module, with one voice question.

USD 149 a month founding price (regular USD 199), kept for as long as you stay subscribed. Everything in Plus included.

In active development and improving every day. Send feedback · Plans and pricing

Analyst Dojo Plus

Your free review list holds 10 items.

Plus keeps everything you save, for USD 19 a month. To make room on the free plan, remove something from your review list.

See Plus

Lessons, checkpoints and the lesson questions in practice stay free. Compare plans